wear resistant coatings > KM cyclone repair special wear abrasion resistant coating

KM cyclone repair special wear abrasion resistant coating

KM cyclone repair special anti wear abrasion resistant coating composite materials

Product description of our KM cyclone repairing anti abrasion wear resistant two part epoxy coatings:
KM cyclone special wear resistant composite material is the Two-component wear resistant polymer composites compounded by modified toughening epoxy resin and modified amine curing agent.
It’s widely used in the repairing of various heavy duty medium wear-out parts and preparation of wear resistant coating on the surface of various machine parts which have wear resistant,
corrosion resistant requirements.Especially suitable for repairing wear scrap cyclone and preparation of wear resistant pre-protecting coating on the inner wall of new cyclone. Can repair for many times,the specification and size of the equipment after
repairing didn’t change.

product index:

product name	physical state	curing condition (25℃)	range of application
KM cyclone special wear abrasion resistant coating composite material	paste	80℃2h+120℃2h	repairing wear scrap cyclone and preparation of wear resistant pre-protecting coating on the inner wall of new cyclone,the specification and size of the equipment after repairing didn’t change.

color	density (g/cm3)	compressive strength (Mpa) GB1041-2008	tensile strength (Mpa) GB6329-2008	shear strength (Mpa) GB7124-2008	bending strength (Mpa) GB1042-1999	working temperature （℃）
black	2.7	106	41	16	59	-60～150

How to use:
1.Surface treatment: Do coarsening treatment on the needing-repair areas of the cyclone inner wall,grinding with angle grinder or sand blasting and so on,
the surface after coarsening treatment should be cleaned by cleaning agent,then dry it by airing,
the surface after this treatment should be the one coarsening,dry and fresh substrates,should be no greasy dirt and dust.

2.Preparation: Make A and B two components mix uniformly according to the weight ratio 4:1,
generally it’s while construction and configuration,every time don’t configure too much adhesive,
too much adhesive is not easy to mix uniformly.(when the temperature is low,the viscosity of KM wear resistant composite material is high,not easy to mix uniformly,
need to heat A and B two components separately first,then make them mix uniformly).

3.Coating: Make the mixing uniformly KM cyclone special wear resistant composite materials scrape coating on the metal
substrates repeatedly,make the base stock wet up the substrates,then make the mixed-up material press coating on the pending-repair area repeatedly. Pat it to be compacted first,then repair the coating surface to be smooth after the coating spreading in the
suitable size,should pay attention to controlling the coating thickness during repairing to avoid appearing interference phenomenon
in the assembly.

4.Curing condition: heat up to the temperature of 80 degree slowly and keep this temperature for 2 hours,
then heat up to the temperature of 120 degree and keep this temperature for 2 hours again, cool down to the room
temperature slowly.

Packaging specification:
Two-component,20 kg/group, packed in a plastic drum.

Product packaging photo of our KM cyclone anti chemical wear corrosion resistant repair special composite material

------分隔线----------------------------